Warehouse for Sale

Industrial building of approximately 2,600 m2 with a height of approximately 15 meters at the roof and approximately 12 meters below the beam, with a splendid three-storey office building of approximately 900 m2 adjacent but with its own load-bearing structure and external area of approximately 4,000 m2. The warehouse and the office building, as well as the surrounding land, are very well maintained, the location is close to the motorway access of the Turin - Bardonecchia A32 motorway.

INDUSTRIAL BUILDING
The structure is made up of prefabricated reinforced concrete pillars measuring 50x70 and a total height of approximately 12 meters above ground; prefabricated reinforced concrete beams with double slope and ridge height of approximately 165 cm. The infills are smooth horizontal prefabricated panels, with an external finish in smooth gray concrete at the bottom of the formwork, with a painted internal side, placed on the external edge of the pillars and ribbon windows. The roofing consists of a covering made of 7/10 mm corrugated aluminum sheet metal and 10/10 folded aluminum sheet metalwork. There are n. 4 CERRATO overhead cranes with STAHL engines with hook capacity of 40 tons and double winch 25+16 tons.

OFFICE BUILDING
The structure is made up of prefabricated 50x50 section reinforced concrete pillars, flat "inverted L/T" reinforced concrete beams, with a minimum inter-storey height of approximately 300 metres. The intermediate floors are made with double-ribbed "DT" type tiles and inverted "LT" beams sized for an overall overload of approximately 500 kg/m2 in addition to their own weight and a collaborating hood reinforced with ELs mesh. the infills are horizontal prefabricated gravel panels and ribbon windows. the roof is flat and completely blind, sized for a total overload of approximately 220 kg/m2.
the office area was completely renovated with DIA in 2008, completely renewed in the external cladding in self-supporting panels in a medium aluminum color finish, with the emptying of the entrance portico which also receives lighting from the floor, the installation of a lift in latest generation Schindler crystal, for the internal finishes, burnished copper colored lapped ceramic stoneware tiles covering the large staircase to the upper floors, new aluminum windows and doors which respect the horizontal linearity of the architecture; the three office floors have a total area of approximately 900 m2, with movable partition walls in soundproofed transparent glass, opals for the privacy of work activities and meetings, office furniture and lighting from the best brands in the sector (FLOS, ARTEMIDE, CASSINA , VITRA, ALIAS, ZANOTTA, FANTONI WALLSPACE...). The building is equipped with a hot and cold air conditioning system with independent thermostat.

Thermo/hydraulic system
The prefabricated building is equipped with an underground and well-ventilated external heating plant with a pressurized steel boiler for